[调查]收集一下Ubuntu不可兼容硬件（希望大家都把自己在Ubuntu下无法使用的硬件贴下）
我的显卡型号：
安装nvidia官方驱动
我装有两个内核，2.6.32-5-486和2.6.32-5-686
疑问一：用2.6.32-5-686内核无法启动X-window
疑问二：在2.6.32-5-486中无法启用3D，比如我打开blender会提示如下错误:
用这个方法还是不行：http://bbs.chinaunix.net/archiver/?tid-2117928.html
求高手帮忙。。。小弟谢过了！
附上我的xorg.conf：
代码:
nVidia Corporation GT216 [GeForce GT 320M]
安装nvidia官方驱动
代码:
NVIDIA-Linux-x86-270.41.06.run
我装有两个内核，2.6.32-5-486和2.6.32-5-686
疑问一：用2.6.32-5-686内核无法启动X-window
疑问二：在2.6.32-5-486中无法启用3D，比如我打开blender会提示如下错误:
代码:
Xlib: extension "GLX" missing on display ":0.0".
用这个方法还是不行：http://bbs.chinaunix.net/archiver/?tid-2117928.html
求高手帮忙。。。小弟谢过了！
附上我的xorg.conf：
代码:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 270.41.06 (buildmeister@swio-display-x86-rhel47-07.nvidia.com) Mon Apr 18 15:15:12 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/etc/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "glx"
Option "AllowGLXWithComposite" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Option "AddARGBGLXVisuals" "true"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Module"
Load "bitmap"
Load "GLcore"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "type1"
Load "vbe"
Load "synaptics"
EndSection
# nvidia-xconfig: version 270.41.06 (buildmeister@swio-display-x86-rhel47-07.nvidia.com) Mon Apr 18 15:15:12 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/etc/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "glx"
Option "AllowGLXWithComposite" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Option "AddARGBGLXVisuals" "true"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Module"
Load "bitmap"
Load "GLcore"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "type1"
Load "vbe"
Load "synaptics"
EndSection
作者: juagle 发布时间: 2011-05-12
干嘛用486 686的内核?没有装好,两个都是,要禁用一些模块的,自己google一下
作者: leeaman 发布时间: 2011-05-12
leeaman 写道:
干嘛用486 686的内核?没有装好,两个都是,要禁用一些模块的,自己google一下
我装的Debian6.0，默认是686的内核。。。由于无法加载驱动就装了486的内核。。。谢谢了
作者: juagle 发布时间: 2011-05-12
我的是debian sid,不过是用的开源驱动,
http://blog.sina.com.cn/s/blog_6a0dff380100nr6l.html
引用:
Debian Squeeze 安装 Nvidia 驱动
(2010-11-18 21:57:31)
转载
标签：
it
分类： 大三这年
由于Debian Squeeze 自带了nouveau 模块,导致安装Nvidia 官方驱动时出错，研究了一个晚上，终于解决。
先期操作
#apt-get install build-essential linux-headers-$(uname -r)
#cd /usr/src
#ln -s linux-headers-$(uname -r) linux
把NVIDIA-Linux-XXXXXXXXXXX复制到/usr/src
0.在/etc/modprobe.d/blacklist.conf 里加一句blacklist nouveau
1。在启动grub时，按e，进入编辑状态.
2.在内核后加入 nouveau.modeset=0
3.按ctrl + x 启动。
然后ctrl + alt + f1
进入root.
#/etc/init.d/gdm3 stop
#cd /usr/src && sh NVDIA-Linux-XXXXXXXX.run
#startx
(2010-11-18 21:57:31)
转载
标签：
it
分类： 大三这年
由于Debian Squeeze 自带了nouveau 模块,导致安装Nvidia 官方驱动时出错，研究了一个晚上，终于解决。
先期操作
#apt-get install build-essential linux-headers-$(uname -r)
#cd /usr/src
#ln -s linux-headers-$(uname -r) linux
把NVIDIA-Linux-XXXXXXXXXXX复制到/usr/src
0.在/etc/modprobe.d/blacklist.conf 里加一句blacklist nouveau
1。在启动grub时，按e，进入编辑状态.
2.在内核后加入 nouveau.modeset=0
3.按ctrl + x 启动。
然后ctrl + alt + f1
进入root.
#/etc/init.d/gdm3 stop
#cd /usr/src && sh NVDIA-Linux-XXXXXXXX.run
#startx
http://blog.sina.com.cn/s/blog_6a0dff380100nr6l.html
作者: leeaman 发布时间: 2011-05-12
确实
debian装驱动前要先禁用nouveau
debian装驱动前要先禁用nouveau
作者: nmsfan 发布时间: 2011-05-12
我的显卡型号：
安装nvidia官方驱动
我装有两个内核，2.6.32-5-486和2.6.32-5-686
疑问一：用2.6.32-5-686内核无法启动X-window
疑问二：在2.6.32-5-486中无法启用3D，比如我打开blender会提示如下错误:
用这个方法还是不行：http://bbs.chinaunix.net/archiver/?tid-2117928.html
求高手帮忙。。。小弟谢过了！
附上我的xorg.conf：
代码:
nVidia Corporation GT216 [GeForce GT 320M]
安装nvidia官方驱动
代码:
NVIDIA-Linux-x86-270.41.06.run
我装有两个内核，2.6.32-5-486和2.6.32-5-686
疑问一：用2.6.32-5-686内核无法启动X-window
疑问二：在2.6.32-5-486中无法启用3D，比如我打开blender会提示如下错误:
代码:
Xlib: extension "GLX" missing on display ":0.0".
用这个方法还是不行：http://bbs.chinaunix.net/archiver/?tid-2117928.html
求高手帮忙。。。小弟谢过了！
附上我的xorg.conf：
代码:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 270.41.06 (buildmeister@swio-display-x86-rhel47-07.nvidia.com) Mon Apr 18 15:15:12 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/etc/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "glx"
Option "AllowGLXWithComposite" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Option "AddARGBGLXVisuals" "true"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Module"
Load "bitmap"
Load "GLcore"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "type1"
Load "vbe"
Load "synaptics"
EndSection
# nvidia-xconfig: version 270.41.06 (buildmeister@swio-display-x86-rhel47-07.nvidia.com) Mon Apr 18 15:15:12 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/etc/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "glx"
Option "AllowGLXWithComposite" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Option "AddARGBGLXVisuals" "true"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Module"
Load "bitmap"
Load "GLcore"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "type1"
Load "vbe"
Load "synaptics"
EndSection
作者: juagle 发布时间: 2011-05-12
干嘛用486 686的内核?没有装好,两个都是,要禁用一些模块的,自己google一下
作者: leeaman 发布时间: 2011-05-12
leeaman 写道:
干嘛用486 686的内核?没有装好,两个都是,要禁用一些模块的,自己google一下
我装的Debian6.0，默认是686的内核。。。由于无法加载驱动就装了486的内核。。。谢谢了
作者: juagle 发布时间: 2011-05-12
我的是debian sid,不过是用的开源驱动,
http://blog.sina.com.cn/s/blog_6a0dff380100nr6l.html
引用:
Debian Squeeze 安装 Nvidia 驱动
(2010-11-18 21:57:31)
转载
标签：
it
分类： 大三这年
由于Debian Squeeze 自带了nouveau 模块,导致安装Nvidia 官方驱动时出错，研究了一个晚上，终于解决。
先期操作
#apt-get install build-essential linux-headers-$(uname -r)
#cd /usr/src
#ln -s linux-headers-$(uname -r) linux
把NVIDIA-Linux-XXXXXXXXXXX复制到/usr/src
0.在/etc/modprobe.d/blacklist.conf 里加一句blacklist nouveau
1。在启动grub时，按e，进入编辑状态.
2.在内核后加入 nouveau.modeset=0
3.按ctrl + x 启动。
然后ctrl + alt + f1
进入root.
#/etc/init.d/gdm3 stop
#cd /usr/src && sh NVDIA-Linux-XXXXXXXX.run
#startx
(2010-11-18 21:57:31)
转载
标签：
it
分类： 大三这年
由于Debian Squeeze 自带了nouveau 模块,导致安装Nvidia 官方驱动时出错，研究了一个晚上，终于解决。
先期操作
#apt-get install build-essential linux-headers-$(uname -r)
#cd /usr/src
#ln -s linux-headers-$(uname -r) linux
把NVIDIA-Linux-XXXXXXXXXXX复制到/usr/src
0.在/etc/modprobe.d/blacklist.conf 里加一句blacklist nouveau
1。在启动grub时，按e，进入编辑状态.
2.在内核后加入 nouveau.modeset=0
3.按ctrl + x 启动。
然后ctrl + alt + f1
进入root.
#/etc/init.d/gdm3 stop
#cd /usr/src && sh NVDIA-Linux-XXXXXXXX.run
#startx
http://blog.sina.com.cn/s/blog_6a0dff380100nr6l.html
作者: leeaman 发布时间: 2011-05-12
确实
debian装驱动前要先禁用nouveau
debian装驱动前要先禁用nouveau
作者: nmsfan 发布时间: 2011-05-12
我的显卡型号：
安装nvidia官方驱动
我装有两个内核，2.6.32-5-486和2.6.32-5-686
疑问一：用2.6.32-5-686内核无法启动X-window
疑问二：在2.6.32-5-486中无法启用3D，比如我打开blender会提示如下错误:
用这个方法还是不行：http://bbs.chinaunix.net/archiver/?tid-2117928.html
求高手帮忙。。。小弟谢过了！
附上我的xorg.conf：
代码:
nVidia Corporation GT216 [GeForce GT 320M]
安装nvidia官方驱动
代码:
NVIDIA-Linux-x86-270.41.06.run
我装有两个内核，2.6.32-5-486和2.6.32-5-686
疑问一：用2.6.32-5-686内核无法启动X-window
疑问二：在2.6.32-5-486中无法启用3D，比如我打开blender会提示如下错误:
代码:
Xlib: extension "GLX" missing on display ":0.0".
用这个方法还是不行：http://bbs.chinaunix.net/archiver/?tid-2117928.html
求高手帮忙。。。小弟谢过了！
附上我的xorg.conf：
代码:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 270.41.06 (buildmeister@swio-display-x86-rhel47-07.nvidia.com) Mon Apr 18 15:15:12 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/etc/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "glx"
Option "AllowGLXWithComposite" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Option "AddARGBGLXVisuals" "true"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Module"
Load "bitmap"
Load "GLcore"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "type1"
Load "vbe"
Load "synaptics"
EndSection
# nvidia-xconfig: version 270.41.06 (buildmeister@swio-display-x86-rhel47-07.nvidia.com) Mon Apr 18 15:15:12 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/etc/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "glx"
Option "AllowGLXWithComposite" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Option "AddARGBGLXVisuals" "true"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Module"
Load "bitmap"
Load "GLcore"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "type1"
Load "vbe"
Load "synaptics"
EndSection
作者: juagle 发布时间: 2011-05-12
干嘛用486 686的内核?没有装好,两个都是,要禁用一些模块的,自己google一下
作者: leeaman 发布时间: 2011-05-12
leeaman 写道:
干嘛用486 686的内核?没有装好,两个都是,要禁用一些模块的,自己google一下
我装的Debian6.0，默认是686的内核。。。由于无法加载驱动就装了486的内核。。。谢谢了
作者: juagle 发布时间: 2011-05-12
我的是debian sid,不过是用的开源驱动,
http://blog.sina.com.cn/s/blog_6a0dff380100nr6l.html
引用:
Debian Squeeze 安装 Nvidia 驱动
(2010-11-18 21:57:31)
转载
标签：
it
分类： 大三这年
由于Debian Squeeze 自带了nouveau 模块,导致安装Nvidia 官方驱动时出错，研究了一个晚上，终于解决。
先期操作
#apt-get install build-essential linux-headers-$(uname -r)
#cd /usr/src
#ln -s linux-headers-$(uname -r) linux
把NVIDIA-Linux-XXXXXXXXXXX复制到/usr/src
0.在/etc/modprobe.d/blacklist.conf 里加一句blacklist nouveau
1。在启动grub时，按e，进入编辑状态.
2.在内核后加入 nouveau.modeset=0
3.按ctrl + x 启动。
然后ctrl + alt + f1
进入root.
#/etc/init.d/gdm3 stop
#cd /usr/src && sh NVDIA-Linux-XXXXXXXX.run
#startx
(2010-11-18 21:57:31)
转载
标签：
it
分类： 大三这年
由于Debian Squeeze 自带了nouveau 模块,导致安装Nvidia 官方驱动时出错，研究了一个晚上，终于解决。
先期操作
#apt-get install build-essential linux-headers-$(uname -r)
#cd /usr/src
#ln -s linux-headers-$(uname -r) linux
把NVIDIA-Linux-XXXXXXXXXXX复制到/usr/src
0.在/etc/modprobe.d/blacklist.conf 里加一句blacklist nouveau
1。在启动grub时，按e，进入编辑状态.
2.在内核后加入 nouveau.modeset=0
3.按ctrl + x 启动。
然后ctrl + alt + f1
进入root.
#/etc/init.d/gdm3 stop
#cd /usr/src && sh NVDIA-Linux-XXXXXXXX.run
#startx
http://blog.sina.com.cn/s/blog_6a0dff380100nr6l.html
作者: leeaman 发布时间: 2011-05-12
确实
debian装驱动前要先禁用nouveau
debian装驱动前要先禁用nouveau
作者: nmsfan 发布时间: 2011-05-12