將網卡設置為混砸模式

将网卡设置为混砸模式
转自:www.cublog.cn/u3/104357/showart_2151020.html

#include sys/types.h>
#include stdio.h>
#include unistd.h>
#include sys/socket.h>
#include netinet/in.h>
#include arpa/inet.h>
#include errno.h>
#include linux/if_ether.h>
#include net/if.h>
#include sys/ioctl.h>
#include string.h>
int do_promisc()
{
  int f, s;
  struct ifreq ifr;
  
  if ((f = socket(AF_INET, SOCK_PACKET, htons(ETH_P_IP)))  0)
    return -1;
  strcpy(ifr.ifr_name, "eth0");
  
  if ((s = ioctl(f, SIOCGIFFLAGS, &ifr))  0)
    {
      close(f);
      return-1;
    }
  
ifr.ifr_flags |= IFF_PROMISC;
if ((s = ioctl(f, SIOCSIFFLAGS, &ifr))  0)
    {
      return -1;
    }
  printf("Setting interface ::: %s ::: to promisc\n\n", ifr.ifr_name);
  
  return 0;
}

int main()
{
  do_promisc();
  return 0;
}
[root@mip-123456 ioctl]# ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 00:22:68:3C:9C:F0  
          inet addr:172.24.149.212  Bcast:172.24.149.255  Mask:255.255.255.0
          inet6 addr: fe80::222:68ff:fe3c:9cf0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3643 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6629 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:6253468 (5.9 MiB)  TX bytes:2379136 (2.2 MiB)
          Interrupt:233 Base address:0xa000
[root@mip-123456 ioctl]# ./promisc
Setting interface ::: eth0 ::: to promisc
[root@mip-123456 ioctl]# ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 00:22:68:3C:9C:F0  
          inet addr:172.24.149.212  Bcast:172.24.149.255  Mask:255.255.255.0
          inet6 addr: fe80::222:68ff:fe3c:9cf0/64 Scope:Link
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:3653 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6630 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:6255432 (5.9 MiB)  TX bytes:2379200 (2.2 MiB)
          Interrupt:233 Base address:0xa000
其实可以直接ifconfig eth0 promisc 设置混杂
      ifconfig eth0 -promisc 取消混杂

作者: xhb8413   发布时间: 2010-09-07